LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Driveshaft & Universal Joints >> Differential & Driveline >> Propeller Shaft >> Shaft-Propeller Front >> Removal >> Front Propeller Shaft

Front Propeller Shaft

Fig 1: Transfer Case Companion Flange
GC0024951Courtesy of CHRYSLER LLC
  1. With vehicle in neutral, position vehicle on hoist.
  2. Mark companion flanges and C/V joints at the front and rear of the propeller shaft for installation reference.
  3. Remove bolts (1) from the front and rear C/V joints (2).
  4. Push propeller shaft forward to clear transfer case companion flange.
  5. Remove shaft from the front axle companion flange.
  6. Tilt the front of the shaft down and pull shaft forward and remove from the vehicle.


Fig 1: Left Exhaust Flange
GC0024950Courtesy of CHRYSLER LLC
  1. With vehicle in neutral, position vehicle on hoist.
  2. Remove left side exhaust flange (1) bolts.
  3. Mark companion flanges (3) and C/V joints at the front (2) and rear of the propeller shaft for installation reference.
    Fig 2: Transfer Case Companion Flange
    GC0024951Courtesy of CHRYSLER LLC
  4. Remove bolts (1) from the front and rear C/V joints.
  5. Push propeller shaft forward to clear transfer case companion flange (2).
  6. Remove shaft from the front axle companion flange.
  7. Pull down on the exhaust and tilt the front of the shaft down and pull shaft forward and remove from the vehicle.
scientia non olet · About LEMON Manuals