Rear Axle - 8 1/4: Bearing-Axle: Removal: Bearing-Axle

Fig 1: Bearing Receiver

Courtesy of CHRYSLER LLC

NOTE: Remove bearing with Bearing Remover 6310 and Foot 6310-9.

1. Remove axle shaft.
2. Remove axle seal with seal pick.
3. Position bearing (2) receiver (1) on axle tube.
   Fig 2: Bearing Remover Foot

   Courtesy of CHRYSLER LLC
4. Insert bearing remover Foot 6310-9 (3) through receiver (2) and bearing (1).
   Fig 3: Bearing Remover Assembly

   Courtesy of CHRYSLER LLC
5. Tighten remove nut (1) on the shaft (4) to pull bearing into the receiver (3).