LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Mechanical Brake System - Base (Service Information) >> Parking Brake >> Shoes >> Removal >> Park Brake Shoes - Drum In Hat

Park Brake Shoes - Drum In Hat

Fig 1: Installing Park Brake Shoes
GC0025517Courtesy of CHRYSLER LLC
1 - SUPPORT PLATE
2 - PARK BRAKE SHOES
3 - AXLE
  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the disc brake caliper. See Fig 1. See REMOVAL .
  4. Remove the disc brake rotor. See Fig 1. See REMOVAL .
    Fig 2: Brake Shoes
    GC0025516Courtesy of CHRYSLER LLC
    1 - SUPPORT PLATE
    2 - PARK BRAKE SHOES
    3 - EQUALIZER
    4 - SPRINGS
    5 - HOLD DOWN CLIPS
    6 - ADJUSTER
  5. Disassemble the rear park brake shoes (2). See Fig 2.