Rear Parking Brake Cables

Fig 1: Lock Out Cables

Courtesy of CHRYSLER LLC

1 - PARKING BRAKE HANDLE

2 - PUNCH

3 - CABLE GUIDE

4 - CABLE

Lock out the parking brake cables. See ADJUSTMENTS . See Fig 1.

Fig 2: Mounting Brackets
Courtesy of CHRYSLER LLC

1 - PARK BRAKE CABLES

2 - CARPET
Remove the rear seat. Refer to REMOVAL .
Pull the carpet forward far enough in the rear to gain access to the two parking brake cables thru the floor. See Fig 2.
Disconnect the two cables (1) from the front mount. See Fig 3.

Fig 3: Cable Front Mount
Courtesy of CHRYSLER LLC

1 - RETAINER CLIPS

2 - CABLES
Push the cables (2) thru the floor with the grommets.

Remove the cable from the axle bracket with a proper sized box end wrench over the tangs (1).

Fig 4: Removing/Installing Cable

Courtesy of CHRYSLER LLC

1 - SUPPORT PLATE

2 - PARK BRAKE CABLE

3 - ACTUATOR LEVER