LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Mechanical Brake System - Base (Service Information) >> Hydraulic/Mechanical >> Pedal >> Removal >> Brake Pedal

Brake Pedal

Fig 1: Booster Push Rod
GC0025490Courtesy of CHRYSLER LLC
1 - MASTER CYLINDER ASSEMBLY
2 - BRAKE BOOSTER
3 - CLIP
4 - BRAKE PEDAL
5 - BOOSTER ROD
  1. Remove the knee blocker under the steering column. Refer to REMOVAL .
  2. Remove the retainer clip securing the booster push rod (5) to pedal (4). See Fig 1.
  3. Remove the brake lamp switch. Refer to REMOVAL .
  4. Remove the nuts securing the pedal to the column bracket.
  5. Remove the pedal from the vehicle.