LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Mechanical Brake System - Base (Service Information) >> Hydraulic/Mechanical >> Fluid Reservoir >> Removal >> Reservoir

Fluid Reservoir: Removal: Reservoir

  1. Install prop rod on brake pedal to keep pressure on the brake system.
  2. Remove reservoir cap and siphon fluid into drain container.
  3. Remove the electrical connector from the fluid level switch in the reservoir.
  4. Remove the reservoir mounting bolt.
  5. Remove the reservoir from the master cylinder by pulling upwards.
  6. Remove old grommets from cylinder body.
scientia non olet · About LEMON Manuals