LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Mechanical Brake System - Base (Service Information) >> Hydraulic/Mechanical >> Brake Pads / Shoes >> Removal >> Pads-Disc Brake-Rear

Pads-Disc Brake-Rear

Fig 1: Rear Brake Pads
GC0025466Courtesy of CHRYSLER LLC
1 - DISC BRAKE CALIPER
2 - OUTBOARD BRAKE PAD
3 - DISC BRAKE ROTOR
4 - ANTI-RATTLE SPRING CLIP
  1. Raise and support vehicle.
  2. Remove the wheel and tire assemblies.
  3. Compress the caliper (1).
  4. Remove the caliper slide pin bolts. See REMOVAL .
    NOTE: Do not allow brake hose to support caliper assembly.
  5. Remove the caliper by tilting the top up and off the caliper adapter. See Fig 1.
    Fig 2: Brake Pad Rattle Clip
    GC0025467Courtesy of CHRYSLER LLC
    1 - INBOARD BRAKE PAD
    2 - OUTBOARD BRAKE PAD
    3 - ANTI-RATTLE SPRING CLIP
    4 - CALIPER ADAPTER
  6. Support and hang the caliper.
  7. Remove the inboard brake pad (1) from the caliper. See Fig 2.
  8. Remove the outboard brake pad (2) from the caliper. See Fig 2.
scientia non olet · About LEMON Manuals