Front Brake Hose

Fig 1: Brake Hose Mounted

Courtesy of CHRYSLER LLC

1 - COIL SPRING

2 - MOUNTING BOLT

3 - BRAKE HOSE

4 - FRONT OF THE UPPER CONTROL ARM

Install the hose (3).
Install the mounting bolt (2) for the top of the brake hose (3) at the vehicle. See Fig 1.
Install the brake hose banjo bolt at the caliper.
Lower the vehicle and remove the support.
Install the brake line to the brake hose inside the engine compartment by the front control arm bolt (4).
Remove the prop rod from the brake pedal.
Bleed the brake system. See STANDARD PROCEDURE .