LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Body - Interior & Exterior >> Interior >> A-Pillar Trim And Grab Handle >> Removal >> A-Pillar Trim

A-Pillar Trim

Fig 1: Identifying A-Pillar Trim
GC0046704Courtesy of CHRYSLER LLC
  1. Using a small pry tool or equivalent, remove the grab handle trim plugs (1).
  2. Remove the two grab handle screws.
  3. Remove the grab handle and A-pillar trim (2) from the A-pillar.
scientia non olet · About LEMON Manuals