Body - Interior & Exterior: Sunroof: Wiring: Removal: Wiring

Fig 1: Locating Wire Harness

Courtesy of CHRYSLER LLC

1 - CLIPS

2 - ELECTRICAL CONNECTOR

3 - WIRE HARNESS

1. Remove the headliner. See REMOVAL .
2. Disconnect wire harness from vehicle harness (2).
   Fig 2: Wire Harness

   Courtesy of CHRYSLER LLC

   1 - WIRE HARNESS

   2 - DRIVE MOTOR

   3 - SUNROOF MODULE ASSEMBLY

   4 - ELECTRICAL CONNECTOR

   5 - TIE STRAPS

3. Disconnect drive motor electrical connector (4) and cut tie straps (5).
4. Remove harness (1).