Trim Panel
| 1 - WATERDAM |
| 2 - TRIM PANEL CLIP HOLES |
| 3 - INTERIOR HANDLE AND ACTUATOR ROD |
| 4 - SCREWS (2) |
| 5 - TRIM PANEL CLIPS |
| 6 - INTERIOR HANDLE SCREW PLUG |
- Remove the inside handle screw plug and remove the screw (4).
- Remove the pull handle screw.
- Using a trim stick C-4755 or equivalent, disengage the trim panel clips (5) and remove the trim panel.
1 - TRIM PANEL 2 - INTERIOR LATCH HANDLE 3 - LATCH ACTUATOR ROD - Disconnect the electrical connectors and the inside handle actuator rod (3).