LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Heating System (Service Information) >> Heated Seat Switch >> Removal >> Heated Seat Switch

Heated Seat Switch

  1. Disconnect and isolate the negative battery cable.
  2. Remove the appropriate seat cushion side shield.
  3. Disconnect the heated seat switch electrical connector. Depress the locking tab and pull straight apart.
  4. Working from the underside of the switch, gently rock the switch back and forth out of its mounting location.
scientia non olet · About LEMON Manuals