Rear Fog Relay Circuit Low: Notes
For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS article.
- When Monitored:
With the ignition on.
- Set Condition:
BCM detects a low (ground) on the Fog Relay even though it is not attempting to turn on the Rear Fog Lamps for more than 5 seconds.
| Possible Causes |
|---|
| LOW BEAM RELAY |
| OPEN FUSED B+ CIRCUIT |
| LOW BEAM RELAY CONTROL CIRCUIT |
| LOW BEAM RELAY |
| BODY CONTROL MODULE |