Flip-Up Glass Latch

Fig 1: Swing Gate Trim Panel

Courtesy of CHRYSLER LLC

1 - TRIM PANEL

2 - UPPER TRIM PANEL CLIPS

3 - UPPER TRIM CLIP HOLES

4 - TRIM PANEL LOCATOR HOLES

5 - SWING GATE LOCATOR PINS

6 - PUSH IN FASTENERS

Remove the trim panel (1). See REMOVAL .

Fig 2: Flip-Up Glass Latch

Courtesy of CHRYSLER LLC

1 - NUTS (2)

2 - ELECTRICAL CONNECTOR

3 - SWING GATE

4 - ELECTRICAL CONNECTOR

5 - FLIP-UP GLASS LATCH

Disconnect the electrical connectors (2 and 4).
Using a grease pencil or equivalent, mark the location of the latch assembly (5) for installation.
Remove the nuts (1) and remove the latch assembly.