LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Hood >> Hood >> Adjustments >> Hood

Body - Interior & Exterior: Hood: Hood: Adjustments: Hood

  1. If hood is low in relation to cowl panel, insert shims between hinge and hood.
  2. Adjust hood bumper in or out to adjust hood-to-fender height alignment.
  3. Adjust the hood latch as necessary. Tighten the nuts to 14 N.m (10.5 ft. lbs.).
  4. Align the latch striker so that striker enters the latch squarely and without binding.
scientia non olet · About LEMON Manuals