Vacuum Reservoir

Fig 1: Vacuum Reservoir Location

Courtesy of CHRYSLER LLC

The vacuum reservoir (1) is located behind and at the outer end of the instrument panel. See Fig 1. To gain access for testing or removal, remove glovebox assembly. Also remove fuse box access cover panel at end of instrument panel. On vehicles equipped with LHD (Left Hand Drive), this fuse access panel is located at right end of instrument panel. On vehicles equipped with RHD (Right Hand Drive), this access panel is located at left end of instrument panel.

1. Remove glovebox assembly. Access to reservoir vacuum line and fitting can now be made.
2. Remove vacuum line at reservoir.
3. Remove fuse access cover panel at end of instrument panel.
4. Through fuse access opening, remove two horizontally mounted screws (2). See Fig 1.
   Fig 2: View Of Vacuum Reservoir & Screws

   Courtesy of CHRYSLER LLC

   1 - VACUUM RESERVOIR

   2 - HORIZONTAL MOUNTING SCREWS (2)

   3 - VERTICAL MOUNTING SCREW (1)

5. From bottom of instrument panel, remove one vertically mounted screw (3). See Fig 2.
6. Remove reservoir from instrument panel.