LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Overhead Console (Service Information) >> Electronic Vehicle Info Center >> Removal >> Electronic Vehicle Information Center

Electronic Vehicle Information Center

Fig 1: Electronic Vehicle Information Center (EVIC) Module
GC0025607Courtesy of CHRYSLER LLC
NOTE: If the EVIC module is being replaced, the tire pressure monitoring system must be programmed. Refer to TIRES/WHEELS - SERVICE INFORMATION for detailed instructions.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the overhead console from the headliner. See REMOVAL .
  3. Remove the four screws (4) that secure the Electronic Overhead Module (EOM) (2) to the overhead console housing (1).
  4. Remove the EOM (2) from the overhead console housing (1).