Gap And Flush: Patriot

Fig 1: GAP AND FLUSH - MK74

Courtesy of CHRYSLER LLC

NOTE: All dimensions are in millimeters.

O/F = Over Flush
U/F = Under Flush
U/D = Up/Down
F/A = Fore/Aft

GAP AND FLUSH MEASUREMENTS

DIMENSION	DESCRIPTION	GAP	FLUSH
1	Hood to Fascia	9.3 +/- 1.5	Hood U/F 2.9/3.9 +/- 1.5
1	Hood to Fascia	Parallel within 2.0	Consistent within 2.0
2	Hood to Fender	6.5 +/- 1.5	-
2	Hood to Fender	Parallel within 1.5	-
3	Hood to	4.0 +/- 1.5	-
	Body Side Aperture	Parallel within 1.5
	(A-Pillar)	-
4	Fender to	6.4 +/- 1.5	-
	Body Side Aperture	Parallel within 1.5
	(A-Pillar)	-
5	Front and Rear Door Header	4.5 +/- 1.2	Header 1.5 U/F
	To Body Side Aperture	Parallel within 1.2	Transitioning to 0.5 U/F
	-	-	@ Rear +/- 1.2
	-	-	Consistent within 1.5
6	Rear Door to	4.5 +/- 1.2	Rear Door 1.0 O/F1.0+/-1.0
6	Body Side Aperture	Parallel within 1.2	Consistent within 1.5
7	Fuel Filler Door to	3.0 +/- 0.8	Fuel Door 0.5 U/F +/- 1.0
7	Body Side Aperture	Parallel within 0.75	Consistent within 1.0
8	Front and Rear Doors to	6.0 +/- 2.0	-
8	Sill	Parallel within 1.5	-
9	Fender to	4.5 +/- 1.0	Above Belt: 0.0 +/- 1.0
	Front Door	Parallel within 1.0	Consistent within 1.0
	-	-	Below Belt:
	-	-	Fender 1.0 O/F +/- 1.0
	-	-	Consistent within 1.0
10	Fascia to	4.0 +/- 1.5	0.0 @ Z = 600
	Fender (Front)	Parallel within 2.0	Fascia 1.0 O/F @ Z = 485
	-	-	+/- 1.5
	-	-	Consistent within 2.0
11	Liftgate to Roof	7.0 +/- 1.5	Liftgate 1.0 U/F +/- 1.2
11	Liftgate to Roof	Parallel within 2.0	Consistent within 2.0
12	Body Side Aperture to	5.0 @ X = 3080	Body Side Aperture
	Liftgate	4.0 @ Z = 1225	1.0 O/F +/- 1.5
	-	+/- 1.5	-
13	Front Door to	4.5 +/- 1.2	0.0 +/- 1.0
	Rear Door	Parallel within 1.5	Consistent within 1.5
	(Above Belt)	-	-
14	Fender to Fascia	Net to 1.0	0.0 +/- 1.0
14	Fender to Fascia	Net to 1.0	Consistent within 1.5
15	Front Door to Rear Door	4.5 +/- 1.2	Front Door 1.0 O/F +/- 1.0
15	(Below Belt)	Parallel within 1.5	Consistent within 1.5
16	Fascia to	Net to 1.0	0.0 +/- 1.0
16	Body Side Aperture	Net to 1.0	Consistent within 1.5
17	Tail Lamp to	1.5 +/- 1.5	Tail Lamp 1.0 U/F +/- 2.0
17	Body Side Aperture	Parallel within 1.5	Consistent within 2.0
18	Tail Lamp to Fascia	1.5 +/- 1.5	-
18	Tail Lamp to Fascia	Parallel within 2.0	-
19	Tail Lamp to	4.0 +/- 2.0	Liftgate 1.0 U/F +/- 2.0
19	Liftgate	Parallel within 2.0	Liftgate 1.0 U/F +/- 2.0
20	Liftgate to Fascia	U/D 6.0 +/- 2.0	-
20	(Step Pad)	U/D 6.0 +/- 2.0	-
21	Fascia to Liftgate	Cross/Car	-
21	Fascia to Liftgate	4.5 +/- 2.0	-
22	Body Side Aperture to	4.0 +/- 2.0	Liftgate 1.0 U/F +/- 1.0
22	Liftgate	Parallel within 2.0	Liftgate 1.0 U/F +/- 1.0
23	Body Side Aperture to	4.0 +/- 1.5	Body Side Aperture
23	Liftgate Glass	4.0 +/- 1.5	2.0 O/F +/- 1.5