LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Overland, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Instrument Panel >> Cover-Steering Column Opening >> Removal >> Cover-Steering Column Opening

Cover-Steering Column Opening

Fig 1: Identifying Driver Side Hush Panel
GC0026827Courtesy of CHRYSLER LLC
  1. Disconnect and isolate battery negative cable.
  2. Remove the bolts (3) and remove the drivers side hush panel (2).
    Fig 2: Identifying Steering Column Opening Cover
    GC0027900Courtesy of CHRYSLER LLC
  3. Using a trim stick C-4755 or equivalent, separate the upper clips and rotate the cover down and release the lower hinges at the bottom and remove the opening cover.
  4. Rotate cover down to carpet and grasp part at its lower edge and pull up and rearward to snap off the lower hinge pins.
scientia non olet · About LEMON Manuals