Stationary Glass: Windshield: Removal: Windshield

Fig 1: Separating Glass Adhesive

Courtesy of CHRYSLER LLC

1. Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
2. Remove the rear view mirror. See REMOVAL .
3. Remove the rain sensor module from the windshield. Refer to REMOVAL .
4. Remove the cowl grille. See REMOVAL .
   CAUTION: Be careful not to damage painted surfaces when removing moldings or cutting urethane around the windshield.
5. Remove molding from the top of the windshield.
6. Using an assistant and a wire-type windshield cut-out tool (1, 3 and 4), cut and separate the urethane adhesive (2) securing the windshield to the windshield fence.
7. Carefully remove the windshield from the vehicle.