LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Seats >> Cushion/Cover-Cushion - Front >> Removal >> Seat Cushion / Cover - Front

Seat Cushion / Cover - Front

Fig 1: Identifying Seat Cushion Bolts & Clamps
GC0027972Courtesy of CHRYSLER LLC
  1. Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
  2. Move the seat to the forward position and disconnect and isolate the batter negative cable.
  3. Remove the bolts (2) and the clamps (1) and remove the seat cushion.
  4. Disconnect the electrical connector, if equipped.
    Fig 2: Identifying Zip Strip And J-Straps
    GC0027974Courtesy of CHRYSLER LLC
  5. Separate the j-straps (1 & 2) and seat cushion cover and foam.
scientia non olet · About LEMON Manuals