LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Liftgate >> Striker-Latch >> Adjustments >> Latch Striker

Latch Striker

Fig 1: Identifying Striker And Screws
GC0027952Courtesy of CHRYSLER LLC
  1. Using a grease pencil or equivalent, mark the position of the striker (1) to aid in adjustment.
  2. Loosen the striker bolts (2).
  3. Change the striker position to adjust the lower liftgate gap and flush measurement. See SPECIFICATIONS .
  4. Tighten the bolts to 28 N.m (21 ft. lbs.).
scientia non olet · About LEMON Manuals