Seat Back Cushion / Cover - Front

Fig 1: Identifying Front Seats

Courtesy of CHRYSLER LLC

Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
Remove the front seat. See REMOVAL .

Fig 2: Identifying Handles & Shields
Courtesy of CHRYSLER LLC
Remove the lumbar and recliner handles (1).
Remove the screws and remove the side shields (2).

Fig 3: Identifying Belt Buckle
Courtesy of CHRYSLER LLC
Remove the belt buckle.

Fig 4: Identifying Seat Back Bolts
Courtesy of CHRYSLER LLC
Remove the seat back bolts from both sides.

Fig 5: Identifying Head Rest
Courtesy of CHRYSLER LLC
Remove the headrest.

Fig 6: Identifying Zip Strip
Courtesy of CHRYSLER LLC
Separate the j-straps (1 & 2) and pull cover up over frame.

Fig 7: Identifying Cushion, Cover & Hog Rings
Courtesy of CHRYSLER LLC
Cut off the hog rings (2) attaching the cover (3) to the cushion (1).

Fig 8: Identifying Headrest Sleeves And Locking Tab
Courtesy of CHRYSLER LLC
Squeeze the locking tab (3) and remove the headrest sleeves (1) and remove the cover.