Door Glass: Removal
- Remove the door trim panel and the waterdam. (Refer to BODY/FULL DOOR/TRIM PANEL - REMOVAL) .
- Pull the door glass run channel from the door sail.
- Roll glass fully downward.
- Using a trim stick C-4755 or equivalent, remove the screws and remove the door sail panel. See Fig 1 and Fig 2.
- Roll glass 1/4 upward to access regulator arm guide.
- Remove the screws that attach the regulator arm guide to the glass.
- Lift the glass upward while tilting inward and remove from the door.
Courtesy of DAIMLERCHRYSLER CORP.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - DOOR FRAME |
| 2 - TRIM STICK |
| 3 - DOOR SAIL |