LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: CHECKSUM FAILURE >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC INFORMATION AND PROCEDURES - CHECKSUM FAILURE

TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRBIII®, select Body, then Electro/Mech Cluster, read DTCs.
Does the DRBIII® display Checksum Failure?
Yes --> Replace and configure the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Test Complete.		 All
scientia non olet · About LEMON Manuals