LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: AIR BAG LAMP CIRCUIT SHORT >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC INFORMATION AND PROCEDURES - AIR BAG LAMP CIRCUIT SHORT

TEST ACTION APPLICABILITY
1 Turn the ignition on.
NOTE: Ensure the Instrument Cluster and the Air Bag Control Module communicate on the PCI Bus.
NOTE: The Airbag indicator can only be turned on or off by the ACM. The Instrument Cluster reports the status of the indicator to the ACM on the PCI Bus.

With the DRBIII®, read DTCs.
Does the DRBIII® display Air Bag Lamp Circuit Shorted?
Yes --> Replace and configure the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Test Complete.
All