Diagnostic Procedure
DIAGNOSTIC INFORMATION AND PROCEDURES - ABS INDICATOR INOPERATIVE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 |
NOTE:
The Instrument Cluster ABS Indicator will not illuminate during the cluster Self Test. The indicator is controlled by PCI Bus messages received from the CAB.
NOTE:
The CAB will command the ABS Indicator on when the ignition is cycled to the Run/Start position. With the DRBIII®, read DTCs.Does the DRBIII® display any ABS DTCs?Yes --> Refer to the Anti-Lock Brake System category and perform the appropriate symptom.Perform BODY VERIFICATION TEST - VER 1 .No --> Replace the Instrument Cluster in accordance with the Service Information.Perform BODY VERIFICATION TEST - VER 1 . |
All |