LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: *"NO BUS" IN VF DISPLAY >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC INFORMATION AND PROCEDURES - "NO BUS" IN VF DISPLAY

TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRBIII®, select J1850 Module Scan.
Does the DRBIII® display MIC in the J1850 Module Scan?
Yes --> Replace the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Refer to the COMMUNICATION  category and perform the appropriate symptom.
Perform BODY VERIFICATION TEST - VER 1 .		 All
scientia non olet · About LEMON Manuals