Rear Seat Back Cover: Removal

Remove the seat. (Refer to BODY/SEATS/SEAT - REMOVAL) .
Remove the screws and remove the seat back release handle bezel. See Fig 1.
Release the j-clips at the bottom of the seat back and remove the seat cover.
Remove the hog rings and remove the seat cushion. See Fig 2.

Fig 1: Release Handle

GC0030667

Courtesy of DAIMLERCHRYSLER CORP.

1 - RELEASE HANDLE

2 - BEZEL

3 - SCREWS (2)

Fig 2: Seat Back Cushion

GC0030668

Courtesy of DAIMLERCHRYSLER CORP.

1 - SEAT BACK FRAME

2 - SEAT BACK RELEASE HANDLE

3 - HOG RINGS (4)