LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Rear Header Trim >> Installation

Rear Header Trim: Installation

  1. Route the wire harnesses and washer hose through the trim panel.
  2. Install the header trim and seat the retaining clips fully.
  3. Connect the wiper motor electrical and the washer hose connection.
  4. Connect the rear window defogger electrical connectors, if equipped.
scientia non olet · About LEMON Manuals