LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Hood >> Hinge >> Removal

Body - Interior & Exterior: Hood: Hinge: Removal

  1. Remove the wiper arms. (Refer to ELECTRICAL/WIPERS/WASHERS/WIPER ARMS - REMOVAL) and (Refer to ELECTRICAL/WIPERS/WASHERS/WIPER ARMS - REMOVAL) .
  2. Remove the cowl panel and screen. (Refer to BODY/EXTERIOR/COWL GRILLE AND SCREEN - REMOVAL) .
  3. Remove the bolts attaching the hinge to the cowl.
  4. Using a wax pencil, mark the position of the hinge on the hood for installation alignment reference.
  5. Remove the screws attaching the hinge to the hood. See Figure.
  6. Separate the hinge from the hood.
scientia non olet · About LEMON Manuals