LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Exterior >> Body Decals >> Removal

Body Decals: Removal

NOTE: The key to successful decal removal is to apply heat to area and slowly peel the decal from panel.
  1. Clean the surface as necessary.
  2. Place a piece of masking tape above or below the decal as a reference mark.
  3. Start at one end of the decal and apply heat with a heat gun. Slowly peel the decal from the panel by pulling it back. Do not pull the decal outward from the panel. 
scientia non olet · About LEMON Manuals