Standard Procedure - Hoisting And Jacking Recommendations: Hoist
A vehicle can be lifted with:
- A single-post, frame-contact hoist.
- A twin-post, chassis hoist.
- A ramp-type, drive-on hoist.
NOTE:
When a frame-contact type hoist is used, verify that the lifting pads are positioned properly (1 and 2).
WARNING:
The hoisting and jack lifting points provided are for a complete vehicle. When a chassis or drivetrain component is removed from a vehicle, the center of gravity is altered making some hoisting conditions unstable. Properly support or secure vehicle to hoisting device when these conditions exist.