Body - Interior & Exterior: Interior: Console-Floor: Removal

Fig 1: Removing/Installing Shifter Bezel Ring

Courtesy of DAIMLERCHRYSLER CORP.

1. Using a trim stick C-4755 or equivalent, remove the shifter bezel ring.
   Fig 2: Removing/Installing Shifter Bezel

   Courtesy of DAIMLERCHRYSLER CORP.
2. Using a trim stick C-4755 or equivalent, remove the shifter bezel.
   Fig 3: Removing/Installing Console Rear Cover

   Courtesy of DAIMLERCHRYSLER CORP.
3. Remove the center console back cover (2) and disconnect the electrical connector (3).
   Fig 4: Removing/Installing Center Floor Duct

   Courtesy of DAIMLERCHRYSLER CORP.
4. Remove the screws (2) and remove the console (1).