Door - Front: Hinge: Removal

Fig 1: Identifying Front Door Hinges

Courtesy of DAIMLERCHRYSLER CORP.

Remove the door. (Refer to BODY/DOOR - FRONT/DOOR - REMOVAL)

Fig 2: Door Hinges
Courtesy of DAIMLERCHRYSLER CORP.
Using a grease pencil or equivalent, mark the location of the door hinges (2 and 3) on the front door.
NOTE: The epoxy bonded washers do not need to be separated from the door hinges. If the washers are removed, the door may need to be readjusted.
Remove the four nuts (4) that secure the front door hinges to the door and remove the hinges.
If required, remove the washers (1) from the front door hinges.