LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Door - Front >> Cylinder-Lock >> Removal

Door - Front: Cylinder-Lock: Removal

Fig 1: Removing/Installing Exterior Handle
GC0027864Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the exterior door handle (1) from the outside of the driver side front door (Refer to BODY/DOOR - FRONT/EXTERIOR HANDLE - REMOVAL) .
    Fig 2: Removing/Installing Lock Cylinder
    GC0044906Courtesy of DAIMLERCHRYSLER CORP.
  2. Using hand pressure, push on the face of the lock cylinder (2) until it pops out of the cavity in the back of the door handle.