LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Seats >> Riser-Front >> Removal >> Manual Length Adjuster

Manual Length Adjuster

Fig 1: Removing/Installing Seat Manual Length Adjuster
GC0027980Courtesy of DAIMLERCHRYSLER CORP.
  1. Before proceeding with the following repair procedure, review all warnings and cautions. (Refer to BODY/SEATS - WARNING) 
  2. Remove the seat. (Refer to BODY/SEATS/SEAT - REMOVAL) 
  3. Move the seat to the forward position on the tracks and remove the seat adjuster bolts/nuts (3).
  4. Move the seat to the reward position on the tracks and remove the front seat adjuster bolts/nuts (3).
    NOTE: Passenger seat with strain gauges shown, drivers side seat similar.
  5. Disconnect strain gauge electrical connectors (1), if equipped.
  6. If equipped, remove the strain gauge bolts (2) and remove the strain gauges as necessary.
scientia non olet · About LEMON Manuals