Body - Interior & Exterior: Liftgate: Glass: Removal

Fig 1: Disconnect/Connect Heated Liftgate Glass Electrical Connector

Courtesy of DAIMLERCHRYSLER CORP.

NOTE: Grand Cherokee (WK) shown, Commander (XK) similar.

1. Disconnect heated liftgate glass electrical connector (2).
   Fig 2: Identifying Liftgate Components

   Courtesy of DAIMLERCHRYSLER CORP.
2. Open the liftgate glass (2) and support.
3. Disconnect glass support cylinders (1) at the lower ball studs, (Refer to BODY/LIFTGATE/SUPPORT-STRUT - REMOVAL) 
   Fig 3: Remove/Install Glass

   Courtesy of DAIMLERCHRYSLER CORP.
   NOTE: Grand Cherokee (WK) shown, Commander (XK) similar.
4. Close the glass but not latch in the closed position.
5. Remove hinge covers and remove hinge bolts (2).
6. Remove the glass.