LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Interior >> Molding-Rear Header >> Removal

Molding-Rear Header: Removal

Fig 1: Remove/Install Upper Trim Molding
GC0044972Courtesy of DAIMLERCHRYSLER CORP.
  1. Using a trim stick C-4755 or equivalent, release the retaining clips that secure the header trim molding in the liftgate opening and remove.
scientia non olet · About LEMON Manuals