Instrument Panel: Bezel-Center: Removal

Fig 1: Removing/Installing Shifter Bezel Ring

Courtesy of DAIMLERCHRYSLER CORP.

Using a trim stick C-4755 or equivalent, separate the radio bezel, if equipped.
Using a trim stick C-4755 or equivalent, separate the radio hood bezel.
Using a trim stick C-4755 or equivalent, remove the shifter bezel ring.

Fig 2: Removing/Installing Shifter Bezel
Courtesy of DAIMLERCHRYSLER CORP.
Using a trim stick C-4755 or equivalent, remove the shifter bezel.

Fig 3: Remove/Install Center Bezel
Courtesy of DAIMLERCHRYSLER CORP.
Remove the screw inside the lower storage bin, if equipped.
Using a trim stick C-4755 or equivalent, remove the center bezel and disconnect the electrical connectors.