Wiper Arm Park Ramp: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Disengage the rear wiper arm support from the wiper arm park ramp on the right side of the tailgate just below the rear flip-up glass.
Lift the wiper arm and blade away from the tailgate until the wiper arm hinge is in its over-center position.

Remove the screw that secures the wiper arm park ramp to the tailgate outer panel. See Fig 1.

Fig 1: Wiper Arm Park Ramp Remove/Install

Courtesy of DAIMLERCHRYSLER CORP.

1 - SCREW (1)

2 - PARK RAMP

3 - RIVET NUT (1)

4 - TAILGATE OUTER PANEL

Remove the wiper arm park ramp from the tailgate outer panel.