Backup Lamps
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| CONDITION | POSSIBLE CAUSES | CORRECTION |
|---|---|---|
| BACKUP LAMP DOES NOT ILLUMINATE | 1. Faulty or missing fuse. | 1. Test and replace backup lamp fuse as required. |
| 2. Faulty or missing bulb. | 2. Test and replace backup lamp bulb as required. | |
| 3. Faulty ground circuit. | 3. Test and repair backup lamp ground circuit as required. | |
| 4. Faulty supply circuit. | 4. Test and repair open back-up lamp supply circuit as required. | |
| 5. Faulty switch. | 5. Test and replace backup lamp switch (manual transmission) or transmission range sensor (automatic transmission) as required. | |
| BACKUP LAMP DOES NOT EXTINGUISH | 1. Faulty supply circuit. | 1. Test and repair shorted back-up lamp supply circuit as required. |
| 2. Faulty switch. | 2. Test and replace backup lamp switch (manual transmission) or transmission range sensor (automatic transmission) as required. |