LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 511 (Diagnosis & Overhaul - 42RLE Automatic Transmission) >> Diagnosis And Testing >> Hydraulic Pressure Tests >> TEST TWO - SELECTOR IN MANUAL 2 (Second Gear)

TEST TWO - SELECTOR IN MANUAL 2 (Second Gear)

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This test checks the underdrive clutch hydraulic circuit as well as the shift schedule.
  1. Attach gauge to the underdrive clutch tap.
  2. Move selector lever to the MANUAL 2 position.
  3. Allow vehicle wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 30 mph.
  4. In second gear the underdrive clutch pressure should read 110 to 145 psi.
scientia non olet · About LEMON Manuals