LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 511 (Diagnosis & Overhaul - 42RLE Automatic Transmission) >> Diagnosis And Testing >> Hydraulic Pressure Tests >> TEST FOUR - SELECTOR IN DRIVE (OD ON - Fourth Gear)

TEST FOUR - SELECTOR IN DRIVE (OD ON - Fourth Gear)

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This test checks the 2/4 clutch hydraulic circuit.
  1. Attach gauge to the 2/4 clutch tap.
  2. Move selector lever to the DRIVE position.
  3. Allow vehicle front wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 30 mph. Vehicle should be in fourth gear.
  4. The 2/4 clutch pressure should read 75 to 95 psi.
scientia non olet · About LEMON Manuals