LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Seats >> Seat Cushion - Rear >> Installation

Seat Cushion - Rear: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat cushion and cushion cover onto the seat frame.
  2. Connect the j-straps.
  3. Install the seat back. (Refer to BODY/SEATS/SEAT BACK - REAR - INSTALLATION) .
scientia non olet · About LEMON Manuals