LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Hood >> Hood >> Installation

Section 504 (Body - Interior & Exterior): Hood: Hood: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position hood on hinges.
  2. Install bolts finger-tight.
  3. Align hinges with installation reference marks and tighten bolts to 12 N.m (9 ft. lbs.).
  4. Inspect hood for proper alignment and adjust as necessary.
scientia non olet · About LEMON Manuals