LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Hood >> Hood >> Adjustments >> Adjustment

Section 504 (Body - Interior & Exterior): Hood: Hood: Adjustments: Adjustment

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. If hood is low in relation to cowl panel, insert shims between hinge and hood.
  2. Adjust hood bumper in or out to adjust hood-to-fender height alignment.
  3. Adjust the hood latch as necessary. Tighten the nuts to 11 N.m (8 ft. lbs.).
  4. Align the latch striker so that striker enters the latch squarely and without binding.
scientia non olet · About LEMON Manuals