LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: AIR BAG LAMP CIRCUIT OPEN >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC INFORMATION AND PROCEDURES CHART (AIR BAG LAMP CIRCUIT OPEN)

TEST ACTION APPLICABILITY
1 Turn the ignition on.
NOTE: Ensure the Instrument Cluster and the Air Bag Control Module communicate on the PCI Bus.
NOTE: The Airbag indicator can only be turned on or off by the ACM. The Instrument Cluster reports the indicator status to the ACM on the PCI Bus.

With the DRBIII®, read DTCs.
Does the DRBIII® display Air Bag Lamp Circuit Open?
Yes --> Replace and configure the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Test Complete.		 All
scientia non olet · About LEMON Manuals