LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: *ABS INDICATOR INOPERATIVE >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC INFORMATION AND PROCEDURES CHART (ABS INDICATOR INOPERATIVE)

TEST ACTION APPLICABILITY
1
NOTE: The Instrument Cluster ABS Indicator will not illuminate during the cluster Self Test. The indicator is controlled by PCI Bus messages received from the CAB.
NOTE: The CAB will command the ABS Indicator on when the ignition is cycled to the Run/Start position.
With the DRBIII®, read DTCs.Does the DRBIII® display any ABS DTCs?Yes --> Refer to the Anti-Lock Brake System category and perform the appropriate symptom .Perform BODY VERIFICATION TEST - VER 1 .No --> Replace the Instrument Cluster in accordance with the Service Information.Perform BODY VERIFICATION TEST - VER 1 .
All