Quarter Glass: Removal

Cover surface areas with protective covering to avoid paint damage and extra clean-up time.
Using a razor knife, slide the blade between the quarter glass and the inboard edge of the reveal molding.
Cut around the interior perimeter of the reveal molding and sever the cap of the reveal molding.
Using a cold knife, cut the urethane around the perimeter of the quarter glass.
Remove the quarter glass from the opening. See Fig 1.

Fig 1: HARD TOP QUARTER GLASS

Courtesy of DAIMLERCHRYSLER CORP.

1 - HARD TOP

2 - QUARTER GLASS REVEAL MOLDING

3 - QUARTER GLASS